Hello all
5x10 build almost complete, except for z axis. now here is where the newbie kicks in......
with a floating head, i understand torch lowers till touches the plate, head raises till limit switch trips. and with the known distance to the switch, this sets zero......
now the newbie question, is their still a upper and lower limit switch to stop the z axis?
1.) from raising too high, and running out of threads, and
2.) if for whatever reason misses plate, and the float limit doesn't activate, so that it doesn't bottom out the threads.
or is overall upper and lower a setting in mach3/sheetcam?
and bonus question, if it is 3 seperate limit switches used, does someone have a basic wiring digram for
thanks in advance