[R2D3]

I can not find in any way what are the current g code(On the screen of the program)
For example: G61 or G64
I would also like to ask about the tool
can i use: T1-T3 .... (with length and diameter parameters) offset G40 G41 G42

P.S. Need a manual on the available G code

[Al_The_Man]

Obtain the book CNC Programming by Peter Smid.
Al.

[mactec54]

I can not find in any way what are the current g code(On the screen of the program)
For example: G61 or G64
I would also like to ask about the tool
can i use: T1-T3 .... (with length and diameter parameters) offset G40 G41 G42

P.S. Need a manual on the available G code

You can find anything you want to learn about G-Code on the internet

First to help with the G-Code, what control are you using , not all G-Codes are supported, some controls use different G-Codes, and format

T1 - T3 is correct normally used like this if you have a tool changer T1M6

Work off sets are G54 to G59 Etc depending on the control

G40 G41 G42 is for cutter compensation this is not used to set tool offsets

Tool offsets are set in your tool table ? tool offset page in your control

[R2D3]

I know what they mean
I do not see them on the machine control panel

[Al_The_Man]

https://planet-cnc.com/support/
Al.