[AckeOBD]

Hi,

So i have some issues with my laserengraving machine 25W GCC Spirit.

When im engraving small letters or logos the resultat is not good at all! I get some "3D" effect on the letters/logo. It feels like the machine engraves a little "extra" on the sides of the text.

Very hard to take a picture but i tried and i will attach the photo here.

The s and the t in the first row and in the second c i s.

Does anyone know why?

Hope someone can help me

[Blackened]

Looks like the beam is clipping something it shouldn't along it's path from the tube to the nozzle. Have you checked the allignment?

[AckeOBD]

Looks like the beam is clipping something it shouldn't along it's path from the tube to the nozzle. Have you checked the allignment?

Hi!

Ok, no i have not checked the allignment. Do you know how to do that on a GCC laser? Could this issue maybe be becouse of a bad mirror?

[Blackened]

Yes, it could be a bad mirror too. I suggest you do some maintenance of the optics. Clean all your mirrors and lens. Then check the mirror alignment. No I don't know exactly how to do this on your model laser but the principle is the same for all lasers, the method may differ slightly.

[maxprint]

I think that you have problem with x movement. Check the x - belt and x - rail