I have a TAKAMAZ Fanuc machine with Oi m controller lathe machine. I also have a live tool (Y-axis Quill option). When i jog each axis and then for Zero Return, i press the axis button. The axis move rapid to the dog position and then slow down reading the dog sensor. After reading the sensor, it stops, machine position value becomes 0.0000 but the Home indication light on the axis button start blinking. This light should be stable glow to confirm the Home position but i blinks.

This problem is in all axis. All indication lights start blinking once every axis is returned home. After all this the machine home the turret. It also rotates and reach it home position but the display the turret alarm.

I have adjusted the Grid shift and reference counter parameters but the problem is still there.

Need support ... i am getting mad with this behavior of machine.