584,812 active members*
5,395 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Bridgeport INT316 loss of PLC programs and parameters
Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2018
    Posts
    7

    Bridgeport INT316 loss of PLC programs and parameters

    Hello people,

    Due to power failure on my machine, and dead battery i have faced an issue that machine will not start since there is nothing in PLC. Machine is on Fanuc O mate.

    Does anyone have same machine, or params and PLC program so i could run it up?

    Thanks!

  2. #2
    Join Date
    Feb 2006
    Posts
    213

    Re: Bridgeport INT316 loss of PLC programs and parameters

    PLC program should be on eprom.
    And parameters i will send you.
    [email protected]

  3. #3
    Join Date
    Jan 2018
    Posts
    7

    Re: Bridgeport INT316 loss of PLC programs and parameters

    Hi,

    If it is in eprom, then it shouldn't be a problem for that part. For parameters, thanks in advance you will save me.

    - - - Updated - - -

    Hi,

    If it is in eprom, then it shouldn't be a problem for that part. For parameters, thanks in advance you will save me.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •