584,817 active members*
5,015 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2008
    Posts
    1

    Question iTNC530 QR Values

    I use Q values a good bit for my programming routines, however if the machine is powered down I loose the Q values and have to reload them.

    I was reading the manual and seen that QR values are supposed to be non-volatile in a machine shut down situation.

    I take it this means, that if I use QR values instead of regular Q values that this will fix the issues.

    How do you view the QR values to see what they are set to?

    Thanks in advanced.

  2. #2
    Join Date
    Jan 2015
    Posts
    3

    Re: iTNC530 QR Values

    Press Q button on single/auto side like you normally view Q-parameters and press the "Q,QL,QS,QR" soft key to toggle the list

    E: didn't notice this topic was three years old, sry

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •