512,641 active members
4,048 visitors online
Register for free
Login

Thread: New here

Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Feb 2018
    Posts
    1

    New here

    Hello,I'm a retired Corian fabricator that just could not let go of his CNC Router. I sometimes have the opportunity to do some 2D cutting for people but now want to advance to some 3D work. I've downloaded the trail version of Vetric V Carve Pro.

    I could not make heads or tails of the operation. Looking to find out if any of the forum members know where classes can be attended to get a faster learning curve.

    I've contacted Vetric for this info but also wanted to try any alternatives to obtain this info.

    I'm located in the very southern part of NJ, USA

    Thanks in advance.

    JT

  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Posts
    34659

    Re: New here

    1) Join the Vectric forum, and ask questions.

    2) Watch all of their tutorial videos.

    3) These guys were doing seminars and training around the country, but don't have any scheduled right now. Maintenance mode
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •