Hi guys.
I have the drives and motors that i mention on my title. At the moment they are not connected to signal a fault on my bob. I am reading this on the manual.
I have already done a fault connection on my bob for the vfd. Its relay switches in case of fault and mach3 estops. From what I understand from the manual this is the same function on the drive? So I can connect all 4 of my drives fault output and vfd fault output relay in series on a single input and have mach3 estop in case of any drive or vfd fault?
Results 1 to 2 of 2
-
02-05-2018, 06:11 PM #1
Member
- Join Date
- Mar 2017
- Posts
- 173
Leadshine D808 + ES-M22430 fault signal on mach3
-
02-18-2018, 05:39 PM #2
Member
- Join Date
- Mar 2017
- Posts
- 173
Re: Leadshine D808 + ES-M22430 fault signal on mach3
Anyone knows anything?
Reply With QuoteSimilar Threads
-
How to add Leadshine alarm signal to e-stop chain?
By mkuivamaki in forum Servo Motors / DrivesReplies: 2Last Post: 05-14-2017, 02:50 PM -
Leadshine ES-D808 & ES-M23440 wont connect via protuner
By lopata in forum LeadshineReplies: 0Last Post: 05-13-2016, 11:59 AM -
Wiring Enable and Fault with Leadshine EM-705 and PMDX-126
By piovanelli in forum Stepper Motors / DrivesReplies: 1Last Post: 09-25-2014, 06:07 AM -
Fault and Reset signal in DYN2H
By vertcnc in forum Dmm TechnologyReplies: 18Last Post: 04-18-2013, 03:29 AM
Tags for this Thread
Posting Permissions
