Originally Posted by
kprice1658
I don't see any way in Bios to do this - or with any jumpers. How did you get this done ?
It's done in software as follows. Open the terminal program & type:
Code:
operator@tormachpcnc:~$ sudo lshw -class network
Look at the output to determine the MAC addresses listed as “serial: xx:xx:xx:xx:xx” for each controller chip – the I211 and I219. We will need these for creating a custom file in the next step. Now we create a new file like this:
Code:
operator@tormachpcnc:~$ sudo nano /etc/udev/rules.d/70-persistent-net.rules
where we enter the following data substituting the MAC address for I219 for the first entry, eth0, and the MAC address for the I211 for the second entry, eth1:
Code:
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="80:ee:73:d5:d0:09", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="80:ee:73:d5:d0:0a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
Note: There are 2 long lines here. Use the MAC addresses for your system.
Save this file when you are sure everything is correct & reboot the system. That should take care of it ...
Just bought my second DH110. Got a used I3 off eBay - really like these computers.