[RoverAs1332]

Hello,
I have the following problem, we had the machine installed with the alphacam + post processor of the Biesse Rover AS 1332, as this machine had problems, there was the formatting and in the new installation we could not get it to save the files with the post processing to bise, below follows the video link made to try to explain what I need Alphacam to do again.

https://www.dropbox.com/s/nwboon2eoy...00.03.mp4?dl=0

In the second 30 shows the pre-processing I need to open that is not opening.

Note: I have all the files from the old installation.

I thank you already for trying to help me.

[camnerd]

Hi, why don't contact Your reseller?

[RoverAs1332]

but I got in touch, they informed me that they will check, but that may have been something done by third parties.

Since they did not give me answers I'm still looking for alternatives because I need to solve this as soon as possible.

But I appreciate the help from everyone.

[number000073]

save contacting the reseller tof last,,,they only sell you stuff,,,,,contact the post writer first,,,,,,,,,that code looks fine,,,,can u send me a copy of the code,,,,it maybe just saving the file with .cix extension,,,try opening code in workd pad and saving as xxxx.cix

[number000073]

keysoftwareservice.com

[Maroslav4]

Hi,

which problem you have on a machine? Some error?

[RoverAs1332]

Hello, today we are working normally, because I found an IMG of the OS of the machine with alphacam intact, with that I was able to create a virtual machine and make the personnel access remotely.

As I gained this time, talking to the support they gave me the contact of a third party who could help me, now it is in his hands.

But I will separate a folder with all the files that I think are related to this post processing and I will post it to you along with a file with the code it generates, to see if you can help me.


But I appreciate the help from everyone.

[vojobozovic]

Hi,
Does anyone have a postprocessor for Biesse Rover A, for Alphacam or SolidCam

[Maroslav4]

Hi,
Does anyone have a postprocessor for Biesse Rover A, for Alphacam or SolidCam

For Alphacam yes, Solid Cam no.

[vojobozovic]

thanks for the quick answer, how can I get a postprocessor for Alphacam

[vojobozovic]

For Alphacam yes, Solid Cam no.

How can I get post for Alphacam

[Raja_TEVTA]

Please help me to fix my machine AS-1325
1. AXs 339: Axis is not Calibrated
2. NC in emergency

[russ1962]

Hello,
I have Alphacam 2015 and a Biesse klever 1530g ft.
I need a post for the alphacam.
Can anyone help.

Thanks