I have a Chinese 6040 and looking to do some engraving work mostly on plastic/acrylic.
Have a few questions:
1.) I have a Gecko 540 and use Mach 3, will I be able to use Mach 3? If not, does software that works with Gecko 540 for laser engraving exist?
2.) What software do I need to generate the ?NC? code? (is it even called NC code for laser engraving?)
3.) Looking for laser recommendations. Ebay is selling mostly complete machines. In terms of price range, not sure, I haven't seen how much these things cost yet. Ebay's complete machines go for 200 bux which is suspiciously cheap.
I found this on another forum:
"The diode lasers don't go much higher than 2 watts, which can be useful for engraving wood and for cutting things like paper or thin cardboard. They're small and easy to install and use safe voltages. The diode is sensitive to ESD and needs a special constant-current power supply (a laser diode driver), but it's fairly robust mechanically. Diode lasers are typically blue, and they're extremely dangerous to the eyes (viewing a brief reflection can cause permanent eye damage)."
so sounds like diode lasers are out.
P.S. I'm working with a machine that does 1400mm/min speeds, so not looking for record breaking performance here.