584,814 active members*
5,303 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2017
    Posts
    0

    Ethernet smooth stepper

    Hello I have a automation tek 4 axis cnc kit with the c10breakout board with mach3 connected via parallel port I get no action . I have Windows 10 64bit have installed drivers for the parallel port card but no communication to mach 3 . Hooked up to my neighbors ess with Windows 7 64 bit and we got movement just wanted to double check if Windows 10 and the warp9 ess kit will work if anybody knows ? Also I'm kinda skeptical on the uc100

    Sent from my SAMSUNG-SM-G920A using Tapatalk

  2. #2
    Join Date
    Mar 2003
    Posts
    35538

    Re: Ethernet smooth stepper

    You can't use the parallel port with a 64 bit OS.

    Yes, the ESS will work fine in Windows 10, as will the UC100.
    I'd recommend the UC400ETH or UC300ETH over the UC100, though.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3

    Re: Ethernet smooth stepper

    ESS board is good with window 10,
    https://www.automationtechnologiesin...rd-for-mach-3/

  4. #4
    Join Date
    Dec 2017
    Posts
    0

    Re: Ethernet smooth stepper

    Quote Originally Posted by automationtechinc View Post
    Sweet I was hoping so been dead in the water tried everything

    Sent from my SAMSUNG-SM-G920A using Tapatalk

Similar Threads

  1. G540 with an Ethernet Smooth Stepper set-up
    By GrandpawB in forum Gecko Drives
    Replies: 4
    Last Post: 05-21-2015, 07:42 PM
  2. G540 with an Ethernet Smooth Stepper
    By dmauch in forum Gecko Drives
    Replies: 10
    Last Post: 04-04-2015, 06:21 PM
  3. limit switches and ethernet smooth stepper?
    By bit pusher in forum Charter Oak Automation Support Forum
    Replies: 3
    Last Post: 02-24-2015, 10:05 AM
  4. ethernet smooth stepper
    By daniellyall in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 08-08-2013, 07:40 PM
  5. Smooth Stepper Ethernet Board - Mach3
    By mrpackethead in forum X3/SX3/G0619/G0463
    Replies: 3
    Last Post: 05-09-2013, 02:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •