584,866 active members*
4,984 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > EdgeCam > Will not post M01 or M00.
Results 1 to 7 of 7
  1. #1
    Join Date
    Feb 2018
    Posts
    2

    Will not post M01 or M00.

    Hello,
    I have just started using Edgecam 2017 R2.
    Every time i create a new program it will not post an M00 or M01, i have selected these options in the drop down tab and on tool selection in the work plan.
    I would also like to add a M102 "load position" in to my programs but i dont know how?
    Im currently posting to a Ycm with a fanuc18i control.

    Any help would be greatly appreciated!

    Many thanks

  2. #2
    Join Date
    Jan 2010
    Posts
    171

    Re: Will not post M01 or M00.

    You will need to modify your post, talk to your reseller.

  3. #3
    Join Date
    Feb 2018
    Posts
    59

    Re: Will not post M01 or M00.

    never talk to the reseller,,,we can help here,,,resellers are salesmen only,,,,,,send me the post and what you need done,,and i can adjust it,,,,

  4. #4
    Join Date
    Dec 2008
    Posts
    441

    Re: Will not post M01 or M00.

    Resellers should do the programming of the post and not only sell it!
    Remember, if you buy a post for many $1000, do not post it in a forum! then everyone get it for free....

    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html

  5. #5
    Join Date
    Feb 2018
    Posts
    59

    Re: Will not post M01 or M00.

    when i got into this industry,,,2002,,,,im 37 now,,,getting intouch with a reseller took almost 2 weeks,,,,the experience ive,,they dont really care if we are down,,after buying a cam package for 15k with support and a post,,,its why i started writing posts...just my opinion


    Keysoftwareservice.com

  6. #6
    Join Date
    Dec 2008
    Posts
    441

    Re: Will not post M01 or M00.

    Ok, then i am lucky! i can call my support and they will answer the phone and help me after 20 sec (almost every time) If not i can send a email through the support system and they will contact me after some hours. It depend on how fast i need help
    But if you pay for the support, and get a answer after two weeks!? you should write a email to Vero Software, the people that make Edgecam and tell them how your support is.

    Edgecam | Contact Us

    - - - Updated - - -

    Ok, then i am lucky! i can call my support and they will answer the phone and help me after 20 sec (almost every time) If not i can send a email through the support system and they will contact me after some hours. It depend on how fast i need help
    But if you pay for the support, and get a answer after two weeks!? you should write a email to Vero Software, the people that make Edgecam and tell them how your support is.

    http://www.edgecam.com/contact
    My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html

  7. #7
    Join Date
    Feb 2018
    Posts
    59

    Re: Will not post M01 or M00.

    i thank god, support with the big companies are bad,,,,if there was good support , i would out of business


    Keysoftwareservice.com

Similar Threads

  1. Replies: 3
    Last Post: 11-30-2016, 07:28 PM
  2. Replies: 0
    Last Post: 07-24-2016, 08:43 AM
  3. Special post for presentation! Laser manufacturers/dealers post their contacts here!
    By Litografa in forum Laser Engraving / Cutting Machine General Topics
    Replies: 1
    Last Post: 06-22-2010, 07:23 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •