Hi there i have a Chester Champion 20v Mill ( g0704) CNC options and I'm looking to convert it to CNC . What are my options for hardware kit available? I live in the UK so more than likely have to import it .
thanks for any advice Mick
Hi there i have a Chester Champion 20v Mill ( g0704) CNC options and I'm looking to convert it to CNC . What are my options for hardware kit available? I live in the UK so more than likely have to import it .
thanks for any advice Mick
nothing at all ?
Read the other conversions.
Ok thanks for all the wonderful help
A good start would be to select a conversion kit from a supplier that can also guide you
with the conversion and electronic purchases.
https://www.ebay.com/itm/X3-mini-mil...IAAOSwyXNaJAov
https://www.ebay.com/sch/sis.html?_n...on-Kit-Mounts-
Hi thanks for your help. yes its a hardware kit im looking for . i have most of the electronics required. I keep coming up against a brick wall with suppliers that will ship to the UK. That why i was asking for kit manufactures so i could email them all. instead of trauling through all the posts to find who made the kit each one has used .
thanks though all help is better than none