Originally Posted by
bcnu
This is my original post
2. Start of file standard
n,"M06",t
n_forced,feature_name_comment
n,absolute_coord,"G57"
n,spindle_on,s
output_primary_rotary_index
output_secondary_rotary_index
n,rapid_move_forced,xr,yr,p_rot,s_rot
n,rapid_move,zr
machining_mode
3. Tool change
n,"M06",t
n_forced,feature_name_comment
n,absolute_coord,"G57"
n,spindle_on,s
output_primary_rotary_index
output_secondary_rotary_index
n,rapid_move_forced,xr,yr,p_rot,s_rot
n,rapid_move,zr
This is what I have been editing
2. Start of file standard
n, "M6",t
n_forced,feature_name_comment
n,absolute_coord,"G57",
n,spindle_on,s
n,rapid_move_forced,xr,yr,p_rot,s_rot
n,length_offset , n,rapid_move,zr
output_primary_rotary_index
output_secondary_rotary_index
n,coolant_on
machining_mode
3. Tool change
n,"M6",t
n_forced,feature_name_comment
n,absolute_coord,"G57"
n,spindle_on,s
n,rapid_move_forced,xr,yr,p_rot,s_rot
n,length_offset
n,coolant_on
output_primary_rotary_index
output_secondary_rotary_index
n,rapid_move,zr
n,coolant_on
See anything I need to change ? For some reason I have to have G43 H1 Z1. all on the same line to get it to work .