Does anyone have experience with setting up a robotic cell with a CMM that can do the inspection and have some sort of output that can be read by the lathe/vmc and change the offsets? Ex...Part Ø is .001 over, CMM reads that and tells the cnc to change comp by .001 (or more to be closer to nom)?
Results 1 to 1 of 1
-
03-01-2018, 06:06 PM #1
Registered
- Join Date
- Jun 2014
- Posts
- 1
CMM to CNC integration to make automated offsets
Reply With QuoteSimilar Threads
-
Fauna 21T tool offsets and work offsets
By tar356 in forum FanucReplies: 2Last Post: 09-22-2017, 12:44 PM -
TLO Tool Offsets Zeroed and Fixture Offsets Lost on Power Down DX-32 Torq-Cut 30
By jmullett in forum Bridgeport / Hardinge MillsReplies: 2Last Post: 10-24-2014, 04:17 PM -
origins, offsets, WCS ,and things that make my head hurt
By Marc Davis in forum MastercamReplies: 8Last Post: 02-19-2010, 08:32 PM -
Vertical Integration
By Celling It in forum Uncategorised MetalWorking MachinesReplies: 5Last Post: 01-24-2008, 04:30 AM -
Camsoft Integration
By HillBilly in forum CamSoft ProductsReplies: 4Last Post: 05-31-2004, 06:38 PM
Tags for this Thread
Posting Permissions
