Hello all,
I have searched the world over for a post processor for Siemens 840c lathe and Fusion 360. I have not been able to modify an existing one to be worth while using. I am sure that there is alot of these combinations in use. Does anyone have a solution?
I have the PC and the machine communicating just fine. I am happy to share that setup if it helps anyone.
Thanks in advance to anyone compelled to help, In the meantime, I am just going to poke the buttons the old school way.
Trevor
Results 1 to 4 of 4
-
03-02-2018, 08:10 PM #1
Junior Member
- Join Date
- Feb 2010
- Posts
- 6
Hyundai Lathe with Siemens 840c and Fusion 360 Post Processor
-
03-18-2018, 09:16 PM #2
Member
- Join Date
- Apr 2015
- Posts
- 327
Re: Hyundai Lathe with Siemens 840c and Fusion 360 Post Processor
Still looking it?
Alphacam post and VBA macros, Autodesk HSM post.
www.cadcam-softcz.cz
-
03-18-2018, 11:52 PM #3
Junior Member
- Join Date
- Feb 2010
- Posts
- 6
Yes, I would still like to find a good post processor for this combination. Thanks
-
03-19-2018, 10:04 AM #4
Member
- Join Date
- Apr 2015
- Posts
- 327
Re: Hyundai Lathe with Siemens 840c and Fusion 360 Post Processor
Please send me NC code example to my email [email protected].
I will check it.Alphacam post and VBA macros, Autodesk HSM post.
www.cadcam-softcz.cz
Reply With QuoteSimilar Threads
-
Hyundai HiT 18s CNC lathe with Siemens 840c control
By c-martin in forum Hyundai KiaReplies: 7Last Post: 11-14-2019, 09:51 PM -
Hyundai Hit30s - Siemens 840C
By Web.eng in forum Hyundai KiaReplies: 14Last Post: 12-14-2016, 08:01 AM -
post for Hyundai Hit-15s Siemens Sinumerik 840c
By borutapl in forum Post Processors for MCReplies: 0Last Post: 03-04-2016, 03:07 PM -
1996 Hyundai HiTrol 15S CNC lathe w/ Siemens Sinumerik 840C Simodrive 611D rigid tap?
By oarie in forum Hyundai KiaReplies: 1Last Post: 04-27-2015, 03:25 PM -
Hyundai Hit8s with siemens 840c
By Marx in forum Hyundai KiaReplies: 2Last Post: 05-30-2009, 08:58 PM
Tags for this Thread
Posting Permissions
