I just bought a DYI kit and the first time using any CNC.
I received 4 proximity limiters (inductive) with it. To keep it square.
In the forums for the kit they talk about
1. Y Axis on the left side
2. X Axis on the left side
3. Z Axis
4. Y Axis ... This one did not state if it goes on the left or the right side Y Axis.
After searching I found some pictures of one of the machines and it was on the right side Y axis. So i am not sure if they go one in the back of the left Y Axis and one in the front of the right Y Axis or do they both go on the same side just front and back of the Y axis?
Other question is for the X Axis there is only 1 limiter should there be another one for the other side?
It uses Planet CNC, and March 4.
Any help would be great. Their forum has been down since a period in 2017 and only way to ask questions is M-F on their facebook page to them. Get maybe 1 answer each day so really hoping to find help here.
And sorry in advance for questions that might sound like logical sense to know.
Thanks