584,802 active members*
5,088 visitors online*
Register for free
Login
Page 1 of 2 12
Results 1 to 20 of 35
  1. #1
    Join Date
    Mar 2018
    Posts
    6

    6040 CNCEST USB problems

    Hey All,


    Connected everything like it should installed Mach3 and put on the CNC openend the Mach3 software it says driver loaded but nothing works or responds.
    I did set the config as it should (double checked), still nothing.........
    No drivers cd or Manual was given, took a lot of searching the internet too find anything like plugins but non worked for me.
    Can someoone please help me i really want too enjoy my CNC. (Pic above is my USB card)

    Gr Mike

  2. #2
    Join Date
    Jan 2007
    Posts
    626

    Re: 6040 CNCEST USB problems

    Same board?:

    https://www.amazon.ca/Aluoflower-100.../dp/B0759KP1CV

    There appears to be a driver for it out there somewhere....

    try googling the board part number?

    A U-Tube video:
    https://www.youtube.com/watch?v=uaHiLasUANs

    Steve

  3. #3
    Join Date
    Mar 2018
    Posts
    6

    Re: 6040 CNCEST USB problems

    Thanks, a member send me the link to the files and it works like a charm....thanks again for the help ....now figuring everything els out.

  4. #4
    Join Date
    Mar 2018
    Posts
    1

    Re: 6040 CNCEST USB problems

    Hi Mike,
    Same situation on my side.
    Could you share the link and driver files you mentionned ?
    thank a lot !
    Antoine

  5. #5
    Join Date
    Mar 2018
    Posts
    6

    Re: 6040 CNCEST USB problems

    https://madexp.com/2018/01/01/cnc-3020-usb/

    this should be it.

    Quote Originally Posted by aauffret View Post
    Hi Mike,
    Same situation on my side.
    Could you share the link and driver files you mentionned ?
    thank a lot !
    Antoine

  6. #6
    Join Date
    Apr 2018
    Posts
    2

    Re: 6040 CNCEST USB problems

    Hi Mike!
    I bought the same CNC, but another size (6040) and seller didn't sent any manuals, software or drivers. Can you share all this files with me?
    Regards,
    Igor

  7. #7
    Join Date
    Feb 2018
    Posts
    5

    Re: 6040 CNCEST USB problems

    Quote Originally Posted by MikeCorp View Post
    Hey All,


    Connected everything like it should installed Mach3 and put on the CNC openend the Mach3 software it says driver loaded but nothing works or responds.
    I did set the config as it should (double checked), still nothing.........
    No drivers cd or Manual was given, took a lot of searching the internet too find anything like plugins but non worked for me.
    Can someoone please help me i really want too enjoy my CNC. (Pic above is my USB card)

    Gr Mike
    Can you please send it to me? It sounds like power is at the motors, but nothing happens. My wife is still trying to figure out what I spent our money on


    Sent from my iPhone using Tapatalk

  8. #8

    Re: 6040 CNCEST USB problems

    Those boards do not control functions using discrete I/O functions in real time. Upgrade to a UC100 or UC300ETH

    https://cnc4pc.com/c76-uc300-multifunction-board.html and you will be able to run this with Mach3/4 or UCCNC.

    Please contact us in our website if you have questions.

    Arturo Duncan
    https://cnc4pc.com

  9. #9
    Join Date
    Dec 2007
    Posts
    25

    Re: 6040 CNCEST USB problems

    Since we are on this CNCEST USB board, my table works fine for XYZA, but the spindle controller cannot receive a M03 from Mach3.
    When you click spindle on, it spins up, and click spindle off, it de-energizes.
    It has recognized an M03 and M05 in the past, but just for a short period.
    Any ideas?
    -Christian
    6040 CNCEST USB running on Mach3 with the RnRMotion.dll plugin

  10. #10
    Join Date
    Dec 2018
    Posts
    4

    Re: 6040 CNCEST USB problems

    Hi. Did you get it working. I have the same problem and am looking for answers.
    Thanks for any help you can give me.
    Regards.
    James

  11. #11
    Join Date
    Dec 2018
    Posts
    4

    Re: 6040 CNCEST USB problems

    Hi.
    Could you send me the files please.
    King regards.
    James

  12. #12
    Join Date
    Dec 2007
    Posts
    25

    Re: 6040 CNCEST USB problems

    Still trying different things...

    Quote Originally Posted by hengrave View Post
    Hi.
    Could you send me the files please.
    James
    Which files?

  13. #13
    Join Date
    Dec 2007
    Posts
    25

    Re: 6040 CNCEST USB problems

    Quote Originally Posted by hengrave View Post
    Hi.
    Could you send me the files please.
    King regards.
    James
    James-
    Figured it out yet?
    I have: PM me if you need help.
    -Christian

  14. #14

    Re: 6040 CNCEST USB problems

    Not sure if this is where to start, but it seems that many are seeking files to get there 6040 CNC to talk with their PC. Same issue. No connection. Just got this thing put together and cannot get it to do a thing?

  15. #15
    Join Date
    Jan 2007
    Posts
    626

    Re: 6040 CNCEST USB problems

    Quote Originally Posted by JohnLeslie View Post
    Not sure if this is where to start, but it seems that many are seeking files to get there 6040 CNC to talk with their PC. Same issue. No connection. Just got this thing put together and cannot get it to do a thing?
    Did you see post #5 in this thread?

    There's a link to a page with some info on it.

    Basically, you need to copy a 'plugin' ( for YOUR motion Card ) into your Plugin Folder in Mach 3, as well as having Mach 3 set up correctly.
    The Supplier SHOULD have given you a CD or a link where to find the file, but thats not always teh case.
    The file will be a "dll' file.

  16. #16
    Join Date
    Jul 2019
    Posts
    1

    Re: 6040 CNCEST USB problems

    Quote Originally Posted by MHE123 View Post
    Hi Mike!
    I bought the same CNC, but another size (6040) and seller didn't sent any manuals, software or drivers. Can you share all this files with me?
    Regards,
    Igor
    I just bought the same CNCEST 6040 USB version with 1.5kw spindle
    can you or anyone help
    I am new to cnc and I expected to have some support from the seller

    thanks

  17. #17
    Join Date
    Dec 2007
    Posts
    25

    Re: 6040 CNCEST USB problems

    Quote Originally Posted by gcpcnc View Post
    I just bought the same CNCEST 6040 USB version with 1.5kw spindle

    I am new to cnc and I expected to have some support from the seller <<<"HA HA HAAAA...ya right"

    thanks
    If you have the RED USB board shown at the top of this post, this is the driver which will need to be copied into the \MACH3\Plugins directory:
    https://drive.google.com/open?id=1J7...cAn2oyuDmouP2U

  18. #18
    Join Date
    Dec 2007
    Posts
    25

    Re: 6040 CNCEST USB problems

    Also need to copy this file https://drive.google.com/open?id=1Fx...82oOo_nj0Gq1JK
    to the \MACH3 directory for the proper settings.

    -Christian

  19. #19
    Join Date
    Sep 2010
    Posts
    26

    Re: 6040 CNCEST USB problems

    Thanks Christian.
    Do you know what .dll for this BOB?

    RnRMotion.dll not work.

  20. #20
    Join Date
    Jan 2007
    Posts
    626

    Re: 6040 CNCEST USB problems

    Is this the same board?

    If so, RnR motion .dll should work.
    Attachment 424140

    I found the Manual here

    https://ncmaster.com.au/ncmaster/Mac...Breakout-Board

Page 1 of 2 12

Similar Threads

  1. 6040 limit switch problems
    By wdp67 in forum Chinese Machines
    Replies: 0
    Last Post: 11-28-2017, 04:30 PM
  2. cnc 6040 alu problems
    By donminion in forum Chinese Machines
    Replies: 6
    Last Post: 10-14-2014, 08:55 PM
  3. CNC 6040 with 3 D head Shows problems
    By RodMcM in forum Chinese Machines
    Replies: 8
    Last Post: 02-04-2013, 01:33 AM
  4. CNC 6040 AND VFD PROBLEMS
    By justy22 in forum Phase Converters
    Replies: 2
    Last Post: 07-04-2011, 12:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •