Hello All.
I try to define a gcode for fanuc 31bi machine with rotary table.
The part and its WCS is not located in the center of the rotary table.
The part's WCS is defined as G54 in the machine.
How do I make the transformation from the G54 to the table center so the program run well?
Is there a way the controller calculate it by Gcode? Or should I program the transform somehow in the POSTProcessor?
Regrads,
Eyal
Results 1 to 2 of 2
-
03-12-2018, 08:03 AM #1
Registered
- Join Date
- Mar 2018
- Posts
- 1
Rotary table gcode transformation questions
-
03-13-2018, 01:27 AM #2
Registered
- Join Date
- Feb 2015
- Posts
- 123
Re: Rotary table gcode transformation questions
You might give this a read.
https://www.cncci.com/resources/tips...l%20origin.htm
Rob
Reply With QuoteSimilar Threads
-
Adding a rotary encoder to a large Rotary Table
By small.planes in forum Mechanical Calculations/Engineering DesignReplies: 14Last Post: 04-27-2012, 07:27 PM -
Rotary Table to Tailstock alignment questions
By Vogavt in forum Benchtop MachinesReplies: 12Last Post: 04-15-2011, 04:35 AM -
HRT160 rotary table questions
By Matt@RFR in forum Haas MillsReplies: 15Last Post: 11-18-2010, 01:36 PM -
Rotary table questions.
By Arich0908 in forum MetalWork DiscussionReplies: 5Last Post: 03-17-2010, 02:59 PM -
Rotary table questions.
By Arich0908 in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 03-13-2010, 08:08 PM
Tags for this Thread
Posting Permissions
