585,880 active members*
6,403 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hardinge Lathes > Hardinge GS51 Lathe, cutting wrench flats

Thread: Hardinge GS51 Lathe, cutting wrench flats

Results 1 to 2 of 2
  1. 03-12-2018, 12:45 PM #1
    Sierra Bullets
    Sierra Bullets is offline Registered
    Join Date
    Mar 2014
    Posts
    1

    Hardinge GS51 Lathe, cutting wrench flats

    I'm running a Hardinge GS51 Lathe, Fanuc Series oi-TD controls. I want to cut wrench flats in the Sub Spindle. I have a running program that I'm using to cut flats in the Main Spindle. I didn't write it. When I try to run the same program in the Sub, It will only cut one flat, not four. Here's a copy of the program.

    N2(SIDE CUTTING MILL,MAIN SPINDLE)
    M98P1
    G50S2000
    G98(IPM)
    M66
    M23(CS AXIS)
    T1111(3" DIAM SIDE CUTTER)
    S1800M52P3
    G0X5.00Z-4.870C0
    G112
    G01C-1.685F50.0
    X-3.370F15.0
    C1.685
    X3.370
    C-1.685
    G113
    M24
    G00X5.00
    M98P1
    M55
    M64
    #500=#500+1
    M30
    %
    Thanks, Dean
    Reply With Quote Reply With Quote
  2. 03-12-2018, 05:53 PM #2
    generaldisarray
    generaldisarray is offline Registered
    Join Date
    Mar 2017
    Posts
    314

    Re: Hardinge GS51 Lathe, cutting wrench flats

    It is polar. are you really using a 3.0 dia cutter?
    What is the distance across flats you are wanting?
    The Z depth in the program is negative. I would expect it to be positive on the sub, unless it works different than I have seen before.

    how many boxes of #2156 will you give me for helping you?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Milling Wrench Flats
    By ranchak in forum BobCad-Cam
    Replies: 39
    Last Post: 01-10-2022, 01:38 AM
  2. parameters 900 of lathe hardinge CS42(HARDINGE T42) with control fanuc 0T
    By jparamo in forum Hardinge Lathes
    Replies: 0
    Last Post: 10-08-2015, 07:32 PM
  3. ** Please help identify Chuck Wrench for CNC lathe picture
    By cjchands in forum MetalWork Discussion
    Replies: 10
    Last Post: 03-19-2007, 12:10 AM
  4. Looking For Someone Interested In Laser Cutting AK Flats
    By Av8trjohn in forum Waterjet General Topics
    Replies: 0
    Last Post: 01-26-2007, 11:42 PM
  5. Mill 2 Flats On A Cnc Lathe
    By cncmcguire in forum Vertical Mill, Lathe Project Log
    Replies: 2
    Last Post: 06-09-2006, 01:15 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules