[jmoreno]

Is it normal,? I have chinese machine 80 watt laser (RECI genuine) I used a bucket and water pump as cooler for the laser tube, the water inside the bucket are electrified.
Is it normal for the water to get electrified from the laser tube?
Or my laser tube is damaging / broken and that's why it passes electricity into the water.

Sent from my Redmi 4A using Tapatalk

[cinematic2]

As long as laser works it is not broken.
Did you check all groud cables in your machine?
Chinese have only 2 wire wall instalation so thay are not used to make proper grounding.
Call for electrician to check it.

[abyss]

I used a bucket and water pump as cooler for the laser tube, the water inside the bucket are electrified.

good chance it can be NOT laser itself, but water pump. As Cinematic2 told - call electrician.

[engraving_hub]

Don’t touch the water and you will be good Togo.


Sent from my iPhone using Tapatalk

[MichaelHenry]

Don’t touch the water and you will be good Togo.


Sent from my iPhone using Tapatalk

That's just asking for trouble. Get it fixed or become the next Darwin awardee.

[mactec54]

Is it normal,? I have chinese machine 80 watt laser (RECI genuine) I used a bucket and water pump as cooler for the laser tube, the water inside the bucket are electrified.
Is it normal for the water to get electrified from the laser tube?
Or my laser tube is damaging / broken and that's why it passes electricity into the water.

Sent from my Redmi 4A using Tapatalk

I would say, your water pump is faulty, and should be replace before someone gets electrocuted, the Chinese supplied water pumps should not be used as they have no Ground, or are not double insulated, check the Machine Grounds as well, they may not be up to code as well, this is a must check for all Chinese Machines, as in China they are not required to use a Ground, which results in lots of deaths from electrocution

[jmoreno]

I would say, your water pump is faulty, and should be replace before someone gets electrocuted, the Chinese supplied water pumps should not be used as they have no Ground, or are not double insulated, check the Machine Grounds as well, they may not be up to code as well, this is a must check for all Chinese Machines, as in China they are not required to use a Ground, which results in lots of deaths from electrocution

Thank you very much for your suggestion. But the water is electrified only when the laser tube is working

Enviado desde mi Redmi 4A mediante Tapatalk

[mactec54]

Thank you very much for your suggestion. But the water is electrified only when the laser tube is working

Enviado desde mi Redmi 4A mediante Tapatalk

Glad you found what is causing the problem

That's all the more reason to check all the laser power supply and machine Grounds, make sure they are in place, if they are not, then this is the best place to start

[jmoreno]

Glad you found what is causing the problem

That's all the more reason to check all the laser power supply and machine Grounds, make sure they are in place, if they are not, then this is the best place to start

Thanks, now I'm using destilate water and change the power supply.

Enviado desde mi Redmi 7 mediante Tapatalk