[chuck767]

Complete Yasnac 3000G CNC controller

I'm retrofitting my Shizuoka AN-S Vertical milling machine with a Yasnac 3000G controller to a PC based control system.

The mill is currently making parts and everything works well.

I want to sell the Yasnac 3000G controller along with any other parts that I will not need in my retrofit project.

Contact me if you have any interest in parts or complete control system.
Regards,
Chuck

List Date: 9/22/2015

For more info, click here to view the original listing: Complete Yasnac 3000G CNC controller
--------------------------------------
This item is no longer available.


--------------------------------------


Mobile friendly version: Complete Yasnac 3000G CNC controller

Go Mobile: Download the free Panjo iOS app now!

[kt600v]

HEllo,chuck767 do you still have parts available i need a CPCR-QR756SD-4K and cpcr-MR drivers

[LUISREYES]

Hi, Need help with HYUNDAI SPT-V30TD Yasnac J50M. Send this alarm 327: NO PROG GEN (RST-NEXT.PRG) 322 CMOS VACANT AREA ERROR 310: SERVO OFF. Maybe have problem with board CP50B. I need instructions for check this machine.

[chuck767]

HEllo,chuck767 do you still have parts available i need a CPCR-QR756SD-4K and cpcr-MR drivers

I changed my plans and ended up selling the Shizoka
AN-S complete.

I did buy a Shizoka B3-V and retrofitted the control with a PC based system running Mach3. Used the warp9 Motion control board and a C62 CNC4PC break a board.

Good luck in finding the Yasnac 3000 G Parts