[djf123]

I have two small parts that I would like made out of metal. The type of metal isn't important so aluminum, steel, or brass would be fine. Whatever metal is cheapest. All tolerances are to +-0.1 mm. Part2 has to fit into Part1. I would require 20 duplicates of Part1 and 10 of Part2. Not a rush job. Looking for the lowest price.

[Jim Dawson]

Pretty hard to quote when there is no thickness dimension or a side view. Your location would be helpful also, a state or country would do.

[djf123]

Pretty hard to quote when there is no thickness dimension or a side view. Your location would be helpful also, a state or country would do.

I'm in PA. Here are 2D drawings of the two parts. All dimensions are in mm.

[konwey]

Has Pm

[ianagos]

I sent a pm

[abdberkana]

Hi,
Here are our quote :
Part1 : 13$ each
Part2 : 20$ each
Shipping not included
Lead time : 5 days

For more details contact : [email protected]
INOMOLD injection Mold and die manufacturer

[Hong18]

I have two small parts that I would like made out of metal. The type of metal isn't important so aluminum, steel, or brass would be fine. Whatever metal is cheapest. All tolerances are to +-0.1 mm. Part2 has to fit into Part1. I would require 20 duplicates of Part1 and 10 of Part2. Not a rush job. Looking for the lowest price.

I can do 5 each.