[jason snyder]

Hi Everyone,

I'm considering purchasing the G0704 Enclosure from Pro Cut CNC and i'm wondering if anyone has any experience with it. I'm considering the one for $1495.00. I contacted a few local fabrication and sheet metal shops to try and get one made locally but they are all very busy and want very specific drawings and i don't really have the ability or time to create my own design at this point.

I had considered a wood tray but this will end up in my shop and i'd prefer a sheet metal enclosure.


Thanks for any feedback.

Jason

[CL_MotoTech]

As I undertand it, I don't think that enclosure is appropriate for coolant. So if you are okay with that, then maybe it's worth it. For $1.5k it doesnt seem worth it to me, then again I'm using a homemade enclosure that is great in function but is still effectively a working prototype. It's constructed of a wood frame with FRP walls and a galvanized steel bottom. I like everything about it with exception of the wood frame, it needs an updating.

[jason snyder]

Thank you very much for the response...I didn't realize the pro cut enclosure wasn't designed for flood coolant. I'll keep looking for another option.

[CS900]

tormach also sells their enclosures. I'm sure the 440 would work for you.

https://www.tormach.com/store/index....05&portrelay=1

and you also need the chip pan...https://www.tormach.com/store/index....73&portrelay=1

a bit more pricey, but maybe an option.