Hello,
I'm new to the CNC world and trying to get into.
Bought Chinese CNC 2030 with USB-LPT special adapter.
Tried to digitize PCB, but result file contains wrong Y coord (all Y are the same and have arbitrary number, sometimes it is -576, other time 0)
Could you advice where can be root cause and how to solve it? Thanks in advance.
0.00000,438.06563,-0.14063
5.45625,438.06563,-0.06563
10.91250,438.06563,-0.10000
0.00312,438.06563,-0.01563
5.45625,438.06563,-0.06250
10.91250,438.06563,-0.06250
0.00312,438.06563,-0.01250
5.45625,438.06563,-0.05625
10.91250,438.06563,-0.06563
Tried trick with setvar ... Create macro m2001.m1s SetVar(2001,getoemdro(801)) and placed it after each G31 - didn't help