I am the new owner of a hurco km3p knee mill. When I go to calibrate the axis the power button will not stay illuminated.
Normal sequence is:
1. Turn on main power
2. wait for computer to boot
3. select manual mode
4. press power button (illuminates when depressed and I can hear a click in the cabinet)
5. power button stays illumicated on release
6. start
7.calibrate axis
8. start
whats happening now is at step 5. the power button will not stay illuminated although I do still hear a click of the relay in the cabinet. Does anyone have any insight?
It was working find this morning.
Results 1 to 2 of 2
-
03-19-2018, 09:50 PM #1
Junior Member
- Join Date
- Mar 2018
- Posts
- 3
Hurco KM3P Power Button Not Staying Illumicated Servos not coming on
-
03-20-2018, 12:39 AM #2
Junior Member
- Join Date
- Mar 2018
- Posts
- 3
Re: Hurco KM3P Power Button Not Staying Illumicated Servos not coming on
SOLVED
The phase generator was not running when I attempted to run a program (OOPS). Not having the 3 phase coming in popped the overloads in the mains power cabinet and just needed to be reset.
Reply With QuoteSimilar Threads
-
Hurco km3p, tree 325 and 425
By sanman116 in forum Want To Buy...Need help!Replies: 0Last Post: 01-17-2012, 03:24 AM -
Hurco KM3P
By ivanfed in forum HURCOReplies: 2Last Post: 11-15-2011, 09:25 AM -
Hurco KM3P
By ivanfed in forum HURCOReplies: 0Last Post: 04-20-2009, 10:48 AM -
Hurco KM3P HELP
By winds1sj in forum HURCOReplies: 7Last Post: 12-20-2008, 08:44 PM
Tags for this Thread
Posting Permissions
