I am the new owner of a hurco km3p knee mill. When I go to calibrate the axis the power button will not stay illuminated.
Normal sequence is:
1. Turn on main power
2. wait for computer to boot
3. select manual mode
4. press power button (illuminates when depressed and I can hear a click in the cabinet)
5. power button stays illumicated on release
6. start
7.calibrate axis
8. start
whats happening now is at step 5. the power button will not stay illuminated although I do still hear a click of the relay in the cabinet. Does anyone have any insight?
It was working find this morning.