Guys, in the fall I picked up a Mastercam x2 system 2 disc set for 25 cents Can in our local charity shop.
I'm quite happy using TCNC for my basement endeavors, but I would be interested to know if it is a complete CNC programme, I have not tried to download it?
Thanks, Terry
Thread: Mastercam x2 system
Results 1 to 3 of 3
-
03-23-2018, 04:55 PM #1
Registered
- Join Date
- Nov 2011
- Posts
- 5
Mastercam x2 system
-
03-23-2018, 05:01 PM #2
Registered
- Join Date
- Oct 2004
- Posts
- 178
Re: Mastercam x2 system
Probably won't work without the dongle. Install it and see.
-
03-25-2018, 05:41 AM #3
Registered
- Join Date
- Feb 2018
- Posts
- 59
Re: Mastercam x2 system
I have an x2 key if your intrested ,,,,,we don’t use the laptop anymore,,,we use x9
keysoftwareservice.com
Reply With QuoteSimilar Threads
-
Post processor for Osai control system from Mastercam x4
By buterbrodas in forum Charter Oak Automation Support ForumReplies: 2Last Post: 08-11-2019, 10:25 AM -
problem running mastercam 9.1 and x4mu2 on the same system
By fishernimr in forum MastercamReplies: 8Last Post: 02-05-2010, 08:37 PM -
Mastercam X System Requirements?
By yongchiprsnapr in forum MastercamReplies: 14Last Post: 10-11-2009, 11:30 PM -
Mastercam System requirments
By jeremy83 in forum Uncategorised CAM DiscussionReplies: 4Last Post: 01-05-2008, 06:32 PM -
Mastercam System requirments
By jeremy83 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 11-01-2007, 11:35 PM
Tags for this Thread
Posting Permissions
