What will be the right spindle speed and feeding rate for a 3mm 4 flute end mill? And which pass depth should I use for cutting in aluminum?
What will be the right spindle speed and feeding rate for a 3mm 4 flute end mill? And which pass depth should I use for cutting in aluminum?
Hi there,
Based on my experience with aluminum cutting, I'd suggest you use these values.
For 3mm 4 flute end mill
Spindle speed: 8000rpm
Feeding rate: 15 mm per second
Try using a pass depth of 0.508mm
Let me know how this works for you.
Thanks.