508,431 active members
3,767 visitors online
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Rockcliff Machine > mpc6515 v 2.0 with lasercut
Results 1 to 5 of 5
  1. #1
    Registered
    Join Date
    Jun 2013
    Posts
    3

    Angry mpc6515 v 2.0 with lasercut

    Hi to all

    thank's in advance, here is the problem:

    just bought a laser engraving cutting machine with mpc6515 motion controller as motherboard (stand alone machine), the suppliers send the machine with 2 Cd's and a green softdog as the machine was sent assembled and operating, thus trying to install the software lasercut5.1 ends up with an error at the beginning with message: ""failed to get setup files"" and with lasercut5.3 the install go true but not with a complete communication with the machine, after trying to upgrade the firmware i receive now wrong files re-load configuration ,and when all set OK with lasercut5.3 i receive dll version don't much firmware version. please anyone who can help i am at a dead end with this machine and i had put all my saving for it so i can work freelance pleaaaaaase.

    Sincerely you rs
    Hicham.

  2. #2
    Registered
    Join Date
    Nov 2009
    Posts
    314
    Hello ,

    Does your problems solved now ?
    You need to have a version check in software after connect machine with PC . Then get correct version of DLL or firmware from manufacture . you may find there are many similar threads like your said in this forum .

    Greetings ,
    Mary Lee
    XYZ Machinery

  3. #3
    Registered
    Join Date
    Jun 2013
    Posts
    3
    hi and thank you again; my problem is solved but there is a think that i would like to know if it is possible, what is the most latest firmware update for the motherboard because untill now i only can upgrade to V4.1.2.3 and in the mean time i wish you all a good time...

  4. #4

    Re: mpc6515 v 2.0 with lasercut

    i want to upgrade the firmware of my MPC 6515 , is the version 4.0.3, and can not understand the files, could somedy help me?

  5. #5

    Re: mpc6515 v 2.0 with lasercut

    how can i do that my brother?
    Quote Originally Posted by hicham View Post
    hi and thank you again; my problem is solved but there is a think that i would like to know if it is possible, what is the most latest firmware update for the motherboard because untill now i only can upgrade to V4.1.2.3 and in the mean time i wish you all a good time...

Similar Threads

  1. MPC6515
    By Bartek33 in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 4
    Last Post: 10-30-2013, 01:46 AM
  2. lasercut 5.3 and MPC6515
    By lordx in forum LaserCut
    Replies: 5
    Last Post: 02-18-2013, 02:11 AM
  3. Lasercut 5.3 -MPC6515 vs wrong position
    By anantblock in forum LaserCut
    Replies: 1
    Last Post: 06-06-2012, 02:04 AM
  4. LaserCut MPC6515, 6535 buy
    By cinematic2 in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 0
    Last Post: 05-05-2012, 11:17 AM
  5. MPC6515, Panasonic Servo and LaserCut 5.4
    By qny in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 2
    Last Post: 11-09-2009, 10:30 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •