Hello to all...:wave:
I have some questions for my new project. There are two nema 23 stepper motors. Which one would work better with a 8825 driver based on these values? Or maybe, which one would use the full potential of torque, speed and temperature without damaging the driver boards?
Thank you for your answers.
Regards


The first...

Step Angle: 1.8 deg
Voltage: 4.0v
Current: 2.0A
Resistance: 2.0Ω
Inductance: 6.2mH
Holding Torque: 1.1Nm
Diameter: 6.35mm

The second...

Step Angle: 1.8 deg
Voltage: 2.5V
Current: 2.8A
Resistance: 0.9Ω
Inductance: 2.5mH
Holding Torque: 1.22Nm