I have a Chinese single phase VFD powering a 2.2 watercooled spindle. I have a basic 5 axis Mach 3 breakout board. What connections do I need to make to which terminals to use Mach3 to turn the spindle on and control the spindle speed? It didn’t come with directions.
Any help would be appreciated.
Results 1 to 2 of 2
-
03-30-2018, 07:28 AM #1
Registered
- Join Date
- Feb 2018
- Posts
- 0
2.2kw water cooled spindle VFD wiring
-
03-30-2018, 03:21 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
Re: 2.2kw water cooled spindle VFD wiring
Plenty of manuals out there, search Huanyang VFD Manual.
You will also need a service Earth ground.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
Crazy Idea - converting Air Cooled spindle to Water Cooled
By BanduraMaker in forum DIY CNC Router Table MachinesReplies: 19Last Post: 01-20-2018, 02:29 AM -
4kw Chinese water cooled spindle wiring to VFD Need Help
By cnccutting in forum Spindles / VFDReplies: 2Last Post: 02-22-2017, 05:11 AM -
Water pump for water cooled spindle
By bballish in forum DIY CNC Router Table MachinesReplies: 1Last Post: 03-01-2016, 02:40 AM -
Water cooled 2.2 KW Spindle water fitting
By dfmiller in forum DIY CNC Router Table MachinesReplies: 13Last Post: 11-26-2013, 06:21 AM -
water cooled spindle vs air cooled
By ken2010 in forum Chinese MachinesReplies: 3Last Post: 10-21-2013, 06:03 PM
Tags for this Thread
Posting Permissions
