[systronic]

Hello everybody.
Following an electric problem I lost all the programming of my controller. I had a recent backup. I put my parameters and my program 9000 in my controller, everything works fine. but when I ask for a tool change, it goes into alarm. I do not have an alarm number. I start the machine and if I order 'M6 T5' (or all other T number). the carousel seems to be set to zero and after the alarm light turns on.

9001(M26 TOOL CHANGE)
M5
M19
G0G91G30Z0
M86T#100 <----- The tool change program is stopped here (M86 = Magazine index)
G28Z0
M99

The value of variable #100 is actually 0.
Thanks all, i speak English, French and Spanish.

[lblade]

Hello systronic. I'm using my Takisawa Mac with Fanuc 0M for several years now after a complete reset of all software.
Can give you my tool change macro code if this helps. Yours, Leo

[systronic]

Yes, I would like. or any useful information

[lblade]

Hello systronic.

Here is my tool change macro code (standard MAC-V1E):

O9001
G91 G28 Z0 M19
G30 Z0 M86
G28 Z0 G90
M99

Param 240=6

Good luck with solving your problem!
Yours, Leo

[fratrane]

hey there systronic,did you ever figure out the fix for this issue? i have the same problem.

[automar]

|hi guys i need help i have a cnc mac-v3 takisawa and a lost the tool change programs y hope that somebody have theprograms

[automar]

|hi guys i need help i have a cnc mac-v3 takisawa and a lost the tool change programs y hope that somebody have theprograms