584,866 active members*
4,953 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Leadwell MCV-OP 1992 Fanuc OM-F Parameter reload
Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2015
    Posts
    16

    Leadwell MCV-OP 1992 Fanuc OM-F Parameter reload

    We had a connection go bad in our battery box.
    Fortunately, we have a backup copy of the parameters.
    There were some issues loading them from a PC so I had to load some by hand.
    Everything works right except the spindle.
    With a 5000 rpm command, it turns at about 100 rpm.

    To make matters worse, I don't have any manuals for it.

    Our Leadwell dealer that we have bought several new machines from has found some settings for the diagnostics, but nothing changed.

    Where do I start looking?
    Does anyone have a book for this machine?

    Thanks...Rob.

  2. #2

    Re: Leadwell MCV-OP 1992 Fanuc OM-F Parameter reload

    Hello!
    Are there any changes if you command 2500 rpm?

  3. #3
    Join Date
    Aug 2012
    Posts
    65

    Re: Leadwell MCV-OP 1992 Fanuc OM-F Parameter reload

    Was the Diagnostics also loaded when you did the Parameters?

  4. #4
    Join Date
    Sep 2021
    Posts
    3
    bro i need v-30 leadwell fanuc o-mf parameters can you send me yours by email: [email protected]
    thankd

Similar Threads

  1. Replies: 12
    Last Post: 08-16-2019, 03:45 PM
  2. LEADWELL LTC-15 Fanuc 0T Parameter loss
    By Kittiwat in forum Fanuc
    Replies: 5
    Last Post: 05-11-2019, 08:03 PM
  3. Sinumerik 810T RELOAD PARAMETER PROCEDURE
    By tano in forum SIEMENS -> Sinumerik 810M/810T
    Replies: 0
    Last Post: 09-16-2016, 01:25 PM
  4. need fanuc 0i mate parameter for leadwell v30 m/c
    By prakashin in forum Machinery Manuals / Brochures
    Replies: 0
    Last Post: 07-10-2012, 06:16 AM
  5. fanuc oi-mc system parameter help leadwell machine
    By mcash3000 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 2
    Last Post: 11-07-2008, 04:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •