[SamTaylor]

The issue;
Assuming that our current spoil board set up is inconsistent as far as even level goes, and as a result the bit drags when it travels around the stock. So its cutting lines 1/4 in deep or so where it travels.

https://i.imgur.com/yAyVSxD.jpg


I raised the 0 a little bit but wouldn't raising the 0 also alter the depth of my passes?

What are some more reliable solutions for spoil board accuracy? Is there something we can do that will alleviate some of the inconsistencies?

[ger21]

You need to surface it with the machine.