do you think for a 60 x 60 inch machine this frame work will be to weak
maybe change sides to 3060
they are currently 1545 with 1530 cross members
the gantry will be made from 30/60
all bearing are 25 mm guild way rails
1 2010 ballscrew for the x , 1 2010 ballscrew for the z
and 2 / one on each side 2010 ballscrews on the side y/a .
does this sound solid? bad pund.
servos no steppers
Thread: to weak Input please
Results 1 to 3 of 3
-
04-06-2018, 01:22 AM #1
Registered
- Join Date
- Mar 2018
- Posts
- 8
to weak Input please
-
04-06-2018, 01:41 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: to weak Input please
That would depend on what it's bolted to. By itself, it would be rather flimsy. It needs a solid base top support it.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
04-06-2018, 02:06 AM #3
Registered
- Join Date
- Mar 2018
- Posts
- 8
Re: to weak Input please
Originally Posted by ger21
3060 for the sides and gantry
hmm this was my original concepts
Reply With QuoteSimilar Threads
-
Weak bearings
By cjloeffler in forum Spindles / VFDReplies: 2Last Post: 06-28-2015, 02:40 AM -
Weak Stepper or Bad? Help.
By Cartierusm in forum Stepper Motors / DrivesReplies: 0Last Post: 06-27-2015, 02:59 AM -
weak monitor - VMC15
By zcases in forum FadalReplies: 6Last Post: 05-05-2012, 12:11 PM -
Weak Motors
By Bob La Londe in forum Automation Technology ProductsReplies: 9Last Post: 09-24-2011, 06:21 PM -
Are my motors to weak?
By oneturboneeded in forum DIY CNC Router Table MachinesReplies: 3Last Post: 10-24-2010, 03:57 AM
Tags for this Thread
Posting Permissions
