I'm looking to purchase some drives for a anilam crusader m control retrofit. The servos are Sem 142vdc and 30amps.I plan on installing encoders also. If anyone has any opinions I would really appreciate it.
Thanks Mike
I'm looking to purchase some drives for a anilam crusader m control retrofit. The servos are Sem 142vdc and 30amps.I plan on installing encoders also. If anyone has any opinions I would really appreciate it.
Thanks Mike
If you are doing a complete retro fit, then you would be better off with something like Dmm
They are in BC
DMM | AC SERVO DRIVE | AC SERVO MOTOR | ROTARY ENCODER
Mactec54
I have used both Copley and the A-M-C drives and they are very nice drives, but keep in mind these are ±10vdc analogue control.
Although somewhat superior to step/dir they do not interface if using Mach etc.
If you do end up using them, use them in the torque mode, not voltage mode.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.