Re: Issues with AXYZ Millennium Router ToolPath
Hello,
I have similar problem at the moment. I just acquired an used one (Millennium) at an industrial auction.
I don't have any manual and even missing the interface sticker buttons at the front. I was able
to make it move in manual but when I go trough menus I don't really know what I am doing, I am just trying
some stuff..
I have Toolpath for Windows & DNC programs on the PC that was included in the auction. It seems the communication
works but Toolpath program is a pain, it's not friendly at all to program something and when I try to send program
to the machine I'm always getting an error at different lines regarding X values or something...
I wish I could use Vectric/Vcarve/Aspire to do my programs but it seems the post-processor
Vectric offer is not included. I read somewhere it may be linked to the old controller too (AMC instead of the recent one A2MC).
I am trying to create the good post-processor at the moment. I am following Vectric PDF regarding creation and checking comparison
of 2 similar programs. I started by doing simple 2 circles and a lines. In Vectric, I do a toolpath with external contour on 1 circle,
another toolpath with internal contour of the other circle and the line is done at the center.
I tried to do the same on the AXYZ Toolpath program but it seems I am not getting it working.
As I understand at the moment, we need to make group of different lines. Each group have different options.
Afterwards you need to apply what to do on each different groups and export the file. I tried it but G-Code appears
that I wasn't able to make it like on VCarve.
I will take a look at your post-processor maybe we could combine some stuff together...?
AXYZ Millennium router CNC: https://goo.gl/gxvdcA
Glass cutting CNC table: https://goo.gl/VrDqGD