Anyone, know of a vendor/engineer for Camworks I can corner at the AWFS in Las Vegas on Julyist 18-21 or so...?
I really like Solidworks and like the ideal or running CAM software in the Cadd program...
Anyone, know of a vendor/engineer for Camworks I can corner at the AWFS in Las Vegas on Julyist 18-21 or so...?
I really like Solidworks and like the ideal or running CAM software in the Cadd program...
I usally do the show and I think Mark Arnett from Cad Graphics West is there.
I am at the Mastercam booth.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Mastercam...humm I was really trying to nail down some camworks info...
As your question that you have changed states I do Mastercam and I told you about my freind at Cad Graphics West that does the solid works stuff that you asked about.Cadcam which booth is yours and what CAM products do you support?
I was trying to help.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
yea, I realized I hadn't digested the inof I had read...
I had jumped the GUN... Sorry...
All good, But I know you should find some one there from Solidworks there that knows about Camworks.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .