584,837 active members*
5,413 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2006
    Posts
    130

    Finally moved my mill

    Installing tomorrow.

    Where can i get good t nuts for the table. Looks like 5/8 slot but the bottom part is way wider than a standard one.

  2. #2
    Join Date
    Dec 2013
    Posts
    5717

    Re: Finally moved my mill

    McMaster has several sizes, scroll down the page a bit

    https://www.mcmaster.com/#machine-ta...-nuts/=1ci3s38

    Or you could just make some
    Jim Dawson
    Sandy, Oregon, USA

Similar Threads

  1. Finally buying a mill - Shizuoka AN-S
    By a67429 in forum Knee Vertical Mills
    Replies: 38
    Last Post: 06-29-2015, 11:23 PM
  2. Finally Entering the Mill World
    By sabastion in forum Benchtop Machines
    Replies: 10
    Last Post: 09-05-2011, 06:14 AM
  3. finally got my mill
    By xclr82xtc in forum Bridgeport / Hardinge Mills
    Replies: 8
    Last Post: 02-23-2010, 07:11 AM
  4. Finally gone and ordered a new mill!
    By klonx in forum Benchtop Machines
    Replies: 11
    Last Post: 08-20-2008, 07:43 AM
  5. Finally, I have a CNC mill ! pics
    By SScnc in forum Benchtop Machines
    Replies: 12
    Last Post: 08-02-2008, 07:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •