Hi,

Using rhinocam 2014, 3 axis.
I need to countersink a series of very small holes of varying diameters. I want to do this by drilling (with a chamfer mill) to the depth of a series calculated point.
IS there are way to drill to a series of varying depth points? I have the points depth calculated so that with a 90 deg mill, drilling to the depth will give the needed chamfer/countersink.
But, can seem to find the correct way tot do this in rhinocam.

Any help will be apprecited.

I didn't find the right solution from the Internet.

References:
https://mecsoft.com/phpbb/viewtopic.php?f=7&t=3149
Marketing video production company

Thank you.