Anyone have something for Bobcad? I could have sworn I found it here in 20min the last time. Laptop crapped out, got the software back on new laptop and registered. Just need to post it.
iirc it came up under DYNA-MILL.PST
I still have an old posting or two. But to be honest no idea how to change or convert to what I need. any idea where I might be able to find?
Thread: post processing
Results 1 to 7 of 7
-
04-23-2018, 03:20 PM #1
Junior Member
- Join Date
- Apr 2018
- Posts
- 15
post processing
-
04-25-2018, 09:47 PM #2
Gold Member
- Join Date
- Nov 2009
- Posts
- 4415
Re: post processing
Look in the post processor section of the BobCad website.
Sent from my iPhone using Tapatalk ProA lazy man does it twice.
-
04-25-2018, 10:36 PM #3
Junior Member
- Join Date
- Apr 2018
- Posts
- 15
Re: post processing
I tried. That may have been where I found it the last time. But it's not there now. And don't have the factory support anymore. Bummer because I could have gotten the code done for free, but didn't need it.
-
05-01-2018, 02:10 PM #4
Registered
- Join Date
- Jul 2010
- Posts
- 172
Re: post processing
I should be able to get it for you.
What version are you running?
TimothyDyna Mechtronics DM4400, Bridgeport Discovery 300, HAAS VF-0E, HAAS VF-2D
BobCad 16, 20, 24 and now V25
-
05-02-2018, 04:42 AM #5
Junior Member
- Join Date
- Apr 2018
- Posts
- 15
Awesome thank you. V28
Originally Posted by 2ferrous
-
05-11-2018, 03:24 PM #6
Junior Member
- Join Date
- Apr 2018
- Posts
- 15
Re: post processing
Anybody?
-
05-12-2018, 04:07 PM #7
Registered
- Join Date
- Jul 2010
- Posts
- 172
Re: post processing
Talked to BobCAD and they no longer have the post processor.
They will have to make a new one.
I searched all over and I don't have any programming manuals or program samples of the SKIP code.
Could you send a program that uses most of the standard codes including a peck drilling cycle?
Thanks,Dyna Mechtronics DM4400, Bridgeport Discovery 300, HAAS VF-0E, HAAS VF-2D
BobCad 16, 20, 24 and now V25
Reply With QuoteSimilar Threads
-
4th axis Post processing
By cruizer67 in forum CamWorksReplies: 2Last Post: 09-20-2013, 04:11 PM -
Post Processing
By machineitright in forum Dolphin CAD/CAMReplies: 4Last Post: 02-06-2012, 11:56 PM -
ISO post processing
By imbalanced_MJR in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 3Last Post: 08-23-2011, 08:05 AM -
Post processing.....
By MrWild in forum Dolphin CAD/CAMReplies: 5Last Post: 03-22-2008, 07:43 AM
Tags for this Thread
Posting Permissions
