[CATCH22]

Hi guy's, I was hoping someone could help me out, I just purchased an 80's Delta Vh-3600 cnc knee mill and the controller is bad. It is an Anilam Crusader M. I want to run Linuxcnc on it but I want to reuse the SEM servo motors type MT30m4-59 and the drives that are EG&G Torque Systems servo drive model ACU3015-100D, the servos are DC brushed 142 volts and 2400 rpm. My question is can I make these drives work with the Mesa 5i25 and the 7i77 cards. Any help would be greatly appreciated.
Thanks Mike

[specnaz]

Same question here, I'm working on same machine . Have you had any progress with your project?

[CATCH22]

Same question here, I'm working on same machine . Have you had any progress with your project?

Unfortunately life has been getting in the way of my progress 3 kids and a wife I'm wanting to get back to it soon and when I do I will let you know, or if you get something working maybe you can let me know

[specnaz]

Hey any update on this? I have ordered Acord CNC controller board for this and If i can get the spindle to run (I have no idea yet how) with it, then I'll be ordering Clearpath Nema 34 size servos with integrated drivers and retrofitting those