Hi guys
Im building the ox cnc
Made a few videos on youtube
Im getting stuck try to operate both my X Dual axis nem23 motors in sync?
The second x axis is into the a xis output port on the
NVUM NVEM CNC Controller 3/4/5/6 Axis MACH3 Ethernet Interface Board Card 200KHz For Stepper Motor
I know how to slave on mach3 x to a
But I cant get it to even turn, the main x axis is 100% okay, just the other x axis wired into A output
Also the z axis causes me issuses see here?
Any advice please? As spent too many days trying to get it sorted L and used google etc first