584,849 active members*
3,838 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2018
    Posts
    14

    Question "Not ready" state Fanuc 0-P

    Hello everyone,

    As title, i have a press punch CNC Murata's machine!
    It use 0-P Fanuc controller!
    Now, i am in a trouble follow as: When i press "ON" button, the screen display "Not ready" state so I can't operate the machine! (as photo below)
    I can't press any button on the control panel except "ON", "OFF" "EMC" button!
    I checked volts DC on the board: +5v, +24v, +15v, -15v . All are fine!
    But on the mother board, red Led "SO" light! (as photo below)

    So can you help me? This is very necessary with me!

    Thank for your reading and best regard!
    Attached Thumbnails Attached Thumbnails 123.jpg   456.jpg  

  2. #2
    Join Date
    Nov 2021
    Posts
    7

    Re: "Not ready" state Fanuc 0-P

    1. It is assumed that the parameter is damaged.
    2. Check tool plate open.

Similar Threads

  1. Replies: 13
    Last Post: 08-15-2018, 06:22 PM
  2. "Not Ready" on a Fanuc O-M Controller
    By daewooDmv3016 in forum Fanuc
    Replies: 2
    Last Post: 02-13-2013, 05:03 PM
  3. Fanuc spindle drive "not ready"
    By Pyretta-Blaze in forum Fanuc
    Replies: 2
    Last Post: 12-11-2012, 12:00 PM
  4. Fanuc 6m stays in "not ready" mode
    By hopcycle in forum Fanuc
    Replies: 2
    Last Post: 01-30-2009, 02:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •