584,866 active members*
5,028 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > Holzher unimaster 7226 twin cam 32
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2018
    Posts
    3

    Holzher unimaster 7226 twin cam 32

    Hello all,
    This is my first post. I recently purchased a Holzher 7226 mfg in 2006. The operating system is twin cam 32. I can not figure out how to activate a program. I have tried activating programs that were saved on the machine, and I have tried programs I have written with fusion 360 and a post I had custom made for the machine.
    Usually if you load a program (on any cnc) and hit start and there is a problem you will get an error. I can not even get that far, I am not sure if I am in a wrong page but I am completely stuck. Any help would be much appreciated!
    Mean while Holzher will not even talk to you until you have had a tech come and set the machine up but they have a 3 month back log so I have to wait until the end of July. Had I know that might have bought another machine.

  2. #2
    Join Date
    Apr 2015
    Posts
    327

    Re: Holzher unimaster 7226 twin cam 32

    Hello,

    i have some experience with Twin cam. When you create program in Twin cam (*.ldf) it is not possible run it? Which output you have from Fusion 360.

    Let me know on [email protected]
    Alphacam post and VBA macros, Autodesk HSM post.
    www.cadcam-softcz.cz

  3. #3

    Re: Holzher unimaster 7226 twin cam 32

    I have experiamce with twincam posts and compatibiltiy with several other srawing programs. You can reach me at [email protected] if needed. I have worked with several different Holzher machines running twincam.

Similar Threads

  1. Are Twin spindle Twin turret lathes as complex as they look?
    By vfsi in forum Uncategorised MetalWorking Machines
    Replies: 25
    Last Post: 01-19-2019, 08:39 AM
  2. Twin cam / 810 Siemen control position issues on wood router HOLZHER
    By wvagas in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 04-17-2017, 12:34 PM
  3. Replies: 3
    Last Post: 01-24-2015, 12:41 PM
  4. Replies: 0
    Last Post: 10-17-2014, 06:38 PM
  5. CR Onsrud 145G16 vs. Holzher UNI-Master 7226
    By Jamf2 in forum Commercial CNC Wood Routers
    Replies: 9
    Last Post: 01-27-2007, 07:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •