584,861 active members*
4,731 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > SheetCam > Post Processor Files > GibbsCAM 5 axis postprocessor for Heidenhain 530
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2018
    Posts
    2

    Unhappy GibbsCAM 5 axis postprocessor for Heidenhain 530

    Hello. Does anyone has a GibbsCAM postprocessor suitable for a 5 axis vertical Mill with Heidenhain 530??
    I have many other posts ready to share, even a 3 axis heidenhain 530 post, but no one is right for my machine control.
    Attached is the 3 axis heid 530 post...
    Regards

  2. #2
    Join Date
    Mar 2011
    Posts
    23

    Re: GibbsCAM 5 axis postprocessor for Heidenhain 530

    Hi.
    Did you get 5 axis postprocessor for Heidenhain ?,i need looking for them too
    thanks

  3. #3
    Join Date
    Apr 2017
    Posts
    7

    Re: GibbsCAM 5 axis postprocessor for Heidenhain 530

    hello frankkern,
    i really need the post processor for siemen 820T.
    If you can send it to me I would be very grateful.
    and if you need any help that I can give you, don't hesitate, it will be with great pleasure.
    thank you.

Similar Threads

  1. Need a postprocessor for gibbscam
    By pgman68 in forum Post Processor Files
    Replies: 12
    Last Post: 05-22-2020, 05:38 PM
  2. Heidenhain TNC530 Need to post to this 5 axis machine from GibbsCAM.
    By jamieDI in forum Uncategorised CAM Discussion
    Replies: 0
    Last Post: 01-16-2017, 09:51 PM
  3. opening postprocessor in GibbsCam 7.7
    By andrejculk in forum GibbsCAM
    Replies: 1
    Last Post: 12-28-2008, 01:13 AM
  4. Does anybody have a postprocessor for mach3 from GibbsCAM?
    By squale in forum Benchtop Machines
    Replies: 0
    Last Post: 10-29-2008, 12:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •