Does anybody know if these two are compatible (POKEYS57CNC, UCCNC) or know of any plugin or future coming? This would be great!
Results 1 to 4 of 4
-
05-10-2018, 02:33 AM #1
Registered
- Join Date
- Aug 2017
- Posts
- 4
Using Pokeys57cnc and UCCNC software
-
05-10-2018, 02:57 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Using Pokeys57cnc and UCCNC software
No, UCCNC can only use CNC Drive boards.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-07-2018, 06:23 AM #3
- Join Date
- Aug 2018
- Posts
- 3
Re: Using Pokeys57cnc and UCCNC software
Use MACH3 or MACH4 with the PoKEYS57CNC. I have MACH4 and have been very happy with the PoKEYS.
-
08-07-2018, 06:32 AM #4
Registered
- Join Date
- Jun 2015
- Posts
- 943
Re: Using Pokeys57cnc and UCCNC software
You can use the uc100, uc300eth and uc400eth with the uccnc.
uccnc is superior to mach3 and 4, but these controllers also work with mach3 and 4. It is up to you what software you use.
The pokeys only work with mach3 and 4 as far as i know.
Reply With QuoteSimilar Threads
-
uccnc with pokeys57cnc
By habibmgh in forum UCCNC Control SoftwareReplies: 4Last Post: 08-17-2016, 11:41 PM -
UCCNC software license
By Greolt in forum UCCNC Control SoftwareReplies: 14Last Post: 12-08-2015, 01:45 PM -
Getting Started with UCCNC Software
By BanduraMaker in forum UCCNC Control SoftwareReplies: 5Last Post: 02-08-2015, 07:06 PM -
UCCNC software released for sales
By dubble in forum News AnnouncementsReplies: 0Last Post: 08-05-2014, 11:25 AM -
UCCNC software release
By dubble in forum News AnnouncementsReplies: 0Last Post: 06-13-2014, 02:24 PM
Tags for this Thread
Posting Permissions
