509,769 active members
3,890 visitors online
Register for free
Login
IndustryArena Forum > CNC Electronics > Spindles / VFD > Understanding manual tool release wiring diagram for HSD ES919 Spindle
Results 1 to 5 of 5
  1. #1
    Registered
    Join Date
    May 2011
    Posts
    36

    Understanding manual tool release wiring diagram for HSD ES919 Spindle

    Hey Guys I'm struggling understanding how to wire up my HSD manual tool release and was looking if someone can help me figure this out!






    So im confused how to hook up the wires on the pigtail. I understand pin 7 wire will go to a 24v power supply, I dont understand what I connect the pin 8 wire to? Is "P" something I have to add or something that was possibly on the old Controller board or something inside the spindle itself? Andddd I dont understand "C" and "E" lol Any help would be greatly appreciate!

    Thanks
    -Benny

  2. #2
    Registered
    Join Date
    May 2011
    Posts
    36

    Re: Understanding manual tool release wiring diagram for HSD ES919 Spindle

    So I discussed this further with a friend and I think I have a little better understanding-- or at least enough to test a theory. is the 8 "Button Output" an optional connection for an external control? IE controller software?

  3. #3
    Registered
    Join Date
    Jun 2011
    Posts
    682

    Re: Understanding manual tool release wiring diagram for HSD ES919 Spindle

    Looks like the button just connects pins 7 and 8 on the connector. You need to supply 24V power and an air solenoid at the minimum.

  4. #4
    Registered
    Join Date
    Jun 2013
    Posts
    6

    Re: Understanding manual tool release wiring diagram for HSD ES919 Spindle

    Quote Originally Posted by muibubbles View Post
    Hey Guys I'm struggling understanding how to wire up my HSD manual tool release and was looking if someone can help me figure this out!






    So im confused how to hook up the wires on the pigtail. I understand pin 7 wire will go to a 24v power supply, I dont understand what I connect the pin 8 wire to? Is "P" something I have to add or something that was possibly on the old Controller board or something inside the spindle itself? Andddd I dont understand "C" and "E" lol Any help would be greatly appreciate!

    Thanks
    -Benny
    Hi,
    I am in the same situation, I only want to use the button to do tool changes. Did you ever figure this out?
    thanks
    Rob

  5. #5
    Registered
    Join Date
    Jun 2013
    Posts
    6

    Re: Understanding manual tool release wiring diagram for HSD ES919 Spindle

    Ok, I got it...
    It is all about the solenoid (Not Supplied). I originally thought the their was a solenoid within the unit itself.

    Need to wire 8 pin (Button output) inline with the solenoid (Normally Closed).

Similar Threads

  1. HSD SPINDLE MANUAL TOOL RELEASE BUTTON LIGHT IS.OFF
    By M.Abid in forum Chinese Machines
    Replies: 6
    Last Post: 08-06-2015, 09:06 AM
  2. Enshu. DT Centre Wiring Diagram Manual
    By diamondyarn in forum Machinery Manuals / Brochures
    Replies: 0
    Last Post: 05-04-2015, 07:14 PM
  3. Dyna Myte 2400 manual+wiring diagram
    By ysihonda in forum Benchtop Machines
    Replies: 10
    Last Post: 02-26-2015, 09:25 PM
  4. Water chiller Cw3000 & CW5000 Manual and wiring diagram
    By Gweikelasers in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 1
    Last Post: 06-03-2014, 08:15 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •